How To Properly Care for Saddle Blanket Seat Covers

How To Properly Care for Saddle Blanket Seat Covers

Saddle blankets have been around for quite some time. They’re generally used for older model pick-up trucks and as an alternative for high-end seat covers. Saddle blankets originated from the blankets put underneath horses’ saddles to provide comfort.

The original fabric could successfully withstand difficult conditions for extremely long periods of time due to its moisture-wicking capabilities. This meant that the new version was modeled after the original as a counterpart of something truly amazing. Saddle blanket seat covers soon became available for people to have in their vehicles.

This material doesn’t come without its drawbacks, however; it requires maintenance in exchange for its impressive longevity. Therefore, it’s of the utmost importance that you know how to properly care for saddle blanket seat covers when you have them in your vehicle long-term.

Make a Regular Upkeeping Routine

The most important thing to remember when trying to care for anything long-term is to set parameters for yourself. Keep a schedule handy so you can keep track of when you cleaned the covers last and when it’s time to do so again. This is the perfect way to keep things from being left unchecked. When you abide by a cleaning schedule, you’ll maintain your saddle blanket car seat covers for years to come.

Soaking

Soak your saddle blanket seat cover in cold water for no less than one hour. Because the fibers of the polypropylene are so tightly knit, they accumulate a lot of dirt and dander; they can get removed when the fiber is softened by soaking in the water. This will ensure that everything breaks apart and leaves the fibers free of excess debris before the deep cleaning.

Manual Cleaning

The second step in this process involves cleaning the seat covers manually. Get a mild stain detergent and mix it into the cold water with your hands. Gently scrub the material for five to ten minutes until most of the dander and filth have been removed from the seat covers. Depending on how dirty your seat covers are, you may have to repeat this process several times. Each time you do, remember to dump out the dirty water and replace it with some fresh water.

Beat and Brush the Blanket

Next, do a few odd chores to get your seat cover back to its former condition. First, beat and wring the fabric to get the moisture out of it.

While this material might be waterproof, it will still retain moisture directly after being washed. This means it’s now up to you to remove as much of this moisture as possible before moving on to the next step.

The traditional method involves twisting and squeezing the fabric to wring out the excess water trapped within the fibers. While you might assume that this only applies to cleaning saddle blankets, it’s a good method for cleaning saddle blanket seat covers, too. After twisting the water out of your covers, beat them so they can dry thoroughly without mildew and mold settling in.

Then, brush the fabric. Whenever it is in this state, the fabric becomes softened to the point that it can be worked with.

Brushing the fabric allows the dander to become detached from the fabric so removing it will be easier. It takes time and dedication to get right, but once you begin to see the unpleasant accumulation of hair on the brush, you will start to see why grooming your seat covers was necessary. No one wants to sit around that amount of filth. There are all kinds of things that get caught in between the fabric of saddle seat covers, which is why it’s so essential to make sure they get cleaned thoroughly.

Storage for Proper Conditioning

The final stage involves another traditional method. It may seem outdated, but don’t give up on the idea simply because of that. While the original saddle blankets were made of wool, this technique still works fine when it’s applied to the fabric of today’s saddle blanket seat covers.

This technique is a simple hang drying technique that will offer you the best of all possible results. If you store your materials in a dry, dark place, any moisture microdroplets that remain from the cleaning process will be expelled.

However, you will have to eyeball this stage in the process; there is no right or wrong when it comes to how long you should hang up your covers. The main thing to check for is odd smells, which can happen when mildew infects the covers. Mildew can grow on them if the covers never got dried all the way. Also, keep an eye out for any moisture. If the covers feel even slightly damp, store them for a longer period so they can dry thoroughly.

Once the fabric has made it back to its original state of rigidity, then you can begin to reinstall it into your vehicle. When you own a pair of saddle blanket covers, the most important thing you can do is to maintain them. Since they’re made to last for a very long time, you certainly wouldn’t want to withhold their longevity by neglecting them. Keep them well-maintained by cleaning and conditioning them when they need it.

This article has the information you need if you’ve ever wanted to know about how to properly care for saddle blanket seat covers. They give you years of enjoyment and durability if you take care of them properly. These seat covers are made to be extremely tough (just like the trucks that they are fashioned for), and as such, they must be taken care of with the same amount of care. So, when you’re inspecting and cleaning your vehicle, remember to include seat cover maintenance as a part of your routine. If you do, your saddle blanket seat covers will serve you well for a long time.

How To Properly Care for Saddle Blanket Seat Covers

Leave a Reply

Your email address will not be published. Required fields are marked *

[]
×
Enter your email to add this item to cart

No thanks! Add item to cart *By completing this, you are signing up to receive our emails. You can unsubscribe at any time.